Description
Parking, hitching or de-hitching a caravan can be stressful, and costly if you get it wrong. The Camec caravan mover is an economical and effective solution for manoeuvring your caravan. A simple to use remote control engages the rollers and directs the caravan into any position required. Both movers have aluminium rollers that engage with the tyres to make the wheels turn. The supplied cross actuation device enables you to engage both rollers at the same time from one side of your caravan.
Benefits & Features
- Economical and effective solution for manoeuvring your caravan
- Excellent quality aluminium rollers that are friendly to tyres
- Easy winding action to engage or disengage the rollers
- With cross actuation kit you can engage and disengage both rollers from either side
- Optimal compact design
- Suitable for almost any light duty single axle chassis
- E-coating & powder coating corrosion protection
- Fully protected against water spary, dirt and oil
- Soft stop and start technology
- 2 way communication remote control technology provides excellent anti-interference protection
- Stops automatically if it is out of range of the remote control
- Isolation switch to prevent accidental activation of the remote control
Specifications
- Not suitable for rear shackle type suspensions
- Suitable only for L and U profiled chassis with a thickness between 2.8 – 3.5mm
- Operational Voltage: 12 Volt DC
- Speed: Approx. 9cm per sec
- Average current consumption: 20 Amps
- Maximum current consumption: 100 Amps
- Minimum Width (Caravan/Trailer): 1800mm
- Maximum Width (Caravan/Trailer): 2500mm
- Maximum tyre width: 205mm
- Safe working load (2 movers): 1800 Kg reducing to 1500 Kg on a 18% gradient
- Safe working load (4 movers for tandem axle): 2500 Kg reducing to 1800 Kg on a 18% gradient
- Dimensions Part A (mm): L765 x W533 x D270
- Dimensions Part B (mm): L1490 x W260 x D90
- Weight (2 motor set): approx. 37 Kg (excludes battery)
